HackRF One Cell Phone Hack: Bringing Old Phones Back to Life

=====================================================================================

In an era where mobile phone technology has advanced by leaps and bounds, many of us have been left with old cell phones that seem obsolete due to the phase-out of analog systems like 1G in favor of digital standards. However, thanks to hacktivist community's relentless efforts at finding creative ways to repurpose outdated devices for new purposes, it is now possible to run a full-fledged mobile phone network using nothing but an old HackRF One and some know-how.

What is the HackRF One?

-------------------

For those who are unfamiliar with this nifty piece of hardware, let's start from scratch. The HackRF One is essentially a programmable radio receiver and transmitter that can operate across multiple frequency bands, making it an ideal tool for various hacking applications including mobile phone exploitation.

Setting Up Your HackRF One Cell Phone Network

------------------------------------------------

Before we dive into the meaty part – running your very own 1G cellular network using this hackintosh-like setup – you'll need to ensure that:

1. You have a working HackRF One board handy.

2. Your computer is equipped with Linux (preferably Ubuntu or one of its derivatives).

3. The necessary drivers and software for the HackRF One are installed on your system.

Once these basic requirements are met, follow along as we walk through each step to bring an old 1G mobile phone back from the dead:

### Step 1: Configure Your HackRF One

First things first – you'll need to program your HackRF One board with the necessary firmware. For this tutorial, download and install `hackrf-utils` package using aptitude or synaptic.

Next up, connect your HackRF One board via USB cable to an available USB port on your computer.

To verify that the device has been recognized by Linux, run:

```bash

ls /dev/tty*

```

You should see something like `/dev/ttyUSB0`.

### Step 2: Flash Your Old Phone with OpenBTS

Now it's time to flash your old phone with a custom firmware called `OpenB BTS`. Download the latest build from its official website and follow these steps:

1. Boot up your phone in recovery mode (usually by pressing and holding down power button + volume down simultaneously).

2. Connect your phone via USB cable to an available USB port on your computer.

3. Transfer OpenBTS firmware onto the root directory of your SD card or internal storage depending upon which method you prefer.

### Step 3: Start Your HackRF One Cell Phone Network

With everything in place, it's time to kickstart our makeshift cellular network!

1. Plug-in your HackRF One board into an available USB port on your computer.

2. Run the following command from within a terminal window:

```

sudo ./openbts -rHackRFGSM-900 --gsm-channel=0x3F --arfcn=666

```

### Step 4: Configure Your Old Phone for Voice Calls

Now that we have our base station up and running, it's time to configure your old phone for voice calls:

1. Power on your HackRF One board.

2. Press the 'Menu' key followed by 'Settings'.

3. Select 'Networks', then choose 'Add new APN'.

### Step 5: Make Your First Call

With all bases covered, it's finally time to make some history – literally! Pick up that old Nokia 2110 or whatever ancient relic you have lying around and dial the number of another phone connected to your ad-hoc network. Voila! You've just made a call using an actual analog cell tower built from scratch with nothing but $30 worth of hardware!

-------

And there you have it folks – proof that even in today's fast-paced, always-connected world where 5G networks seem like the norm, there's still room for a little bit of retro hacking magic. With just some basic electronics know-how and an old HackRF One board kicking around gathering dust under your bed, anyone can build their very own functioning mobile phone network using nothing but off-the-shelf components.

So next time you're tempted to toss that ancient flip-phone in the bin because it won't connect to any modern networks anymore – think twice! With a little bit of ingenuity and some creative hacking skills courtesy of projects like OpenBTS, your old Nokia 3310 could be back on call sooner than you thought.

Happy hackering!

References

---------

* 'HackRF One'(https://www.hackrf.com/) - Official HackRF website.

* 'OpenBTS Project'(http://openbsc.org/).

Hackrf one cell phone